Note: This article has been updated with lastest available information on July 13th, 2021 at 11:09 am
Factory reset will allow you to reset your Bluetooth connections and/or restore the default 4 factory preset settings
Performing a factory reset won’t affect your tones uploaded to Tonecloud or saved on your phone/tablet, in the Spark App.
However, it will erased custom tones you might have assigned to the 4 presets. So don’t forget to save them on your app or ToneCloud before performing the factory reset.
Here is the procedure :
1. Turn the device off.
2. Press and hold the ‘TAP’ button when turning on Spark amp, release the TAP button when it starts to blink.
3. Long-press the blinking ‘TAP’ button until all four (1~4) LEDs blink once, then release the TAP button.
*The TAP button needs to be released as soon as all four LEDs start to blink.
*Short press the TAP button to abort factory reset.
4. If ‘TAP’ button is blinking and CH1 LED is on, the factory reset process is completed.
*This process will reset all four presets stored on the hardware as well as Bluetooth pairing information. Forget device in Bluetooth settings before connecting again after factory reset.
In case you prefer to watch the Spark factory reset procedure in video
Leave A Comment?